Test Standards and Certifications for Xinjiaxu Safety Shoes' Anti-Smash Labor Protection Shoes
Anti-Smashing Test
Use a steel impact hammer with a specified weight to carry out an impact test. When tested, the gap height under the impacted area should be less than the specified value, and there should not be any penetrating cracks in the direction of the test axis. National standards have different regulations on test hammer specifications and machine structure, which should be considered.
Puncture Resistance Test
The testing machine is equipped with a pressure plate containing a test nail with a truncated tip over 60HRC hardness. Place the shoe sole sample for nail piercing at 10 mm/min until penetration. Record maximum force. Test 4 points per sole, including 1 point at the heel, with 30mm minimum spacing and 10mm edge clearance. Test between anti-slip blocks.
Electrical Properties Test
Condition shoe samples in dry and wet atmospheres, fill with steel balls, and measure resistance between probes. Conductive shoes require ≤100K ohms resistance; anti-static shoes 100K-100M ohms.
Qingdao Xinjiaxu Protective Equipment Co., Ltd . has obtained ISO9001, ISO14001 and OHSAS18001 certifications and passed German, Australian, European, Australian and North American standards. Please feel free to purchase their certified safe anti-smash shoes.